• Register
  • Help
Results 1 to 2 of 2

Topic: Help! Trying to get a GigaDAW to speak to an ADAT bridge...

Share/Bookmark
  1. #1

    Help! Trying to get a GigaDAW to speak to an ADAT bridge...

    My plan was to control a PC running Gigastudio with Logic on my mac G4, via a lightpipe connection between a Hammerfall card (PC) and an ADAT bridge (connected to a Pro Tools 24 farm card in my G4).

    I\'ve got MIDI working fine, but don\'t see or hear any audio coming into my Gigastudio Master fader that I set up in Logic. It\'s got ADAT 1-2 set up as the \"input\" and Output 1-2 (DAE) as the output (like everything else in my Logic environment).

    Any ideas?? I\'m not sure where to go from here...

  2. #2

    Re: Help! Trying to get a GigaDAW to speak to an ADAT bridge...

    Phatlippz,

    Just a thought...is your ADAT Bridge config\'ed so that channel 1&2 is set to ADAT and not Digital?

    I have the same setup w/ several gigas and all Frontier cards going into 2 ADAT 24 I/o\'s. Make sure the Hammer card\'s control panelsettings are all set correctly as well.

    As this was posted 2 days ago, I hope you have resolved these issues.

    Hope this helps,
    Didier

Go Back to forum

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •